{ "name": "ReplacementHQ fitment register (3D printers)", "description": "Answers about 3D-printer materials and wear parts, each checked against the maker's own documents. Verification is not physical testing.", "generated": "2026-10-11", "source": "https://replacementhq.co.uk/how-we-verify/", "attribution": "ReplacementHQ", "printers": [ { "slug": "bambu-lab-a1", "brand": "Bambu Lab", "name": "Bambu Lab A1", "lifecycle": "current", "page": "https://replacementhq.co.uk/3d-printing/compatibility/printers/bambu-lab/a1/", "answers": [ { "slot": "pla", "kind": "material", "label": "PLA", "verdict": "fits", "answer": "The maker lists PLA as ideal for the A1.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "petg", "kind": "material", "label": "PETG", "verdict": "fits-with-limits", "answer": "The maker lists PETG as ideal for the A1.", "limits": [ "The A1 is open-frame; the maker recommends an enclosed printer for PETG." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Note : For PETG and PETG-CF/GF, an enclosed printer is recommended to prevent low ambient temperatures from reducing the model's interlayer strength.", "accessed": "2026-10-11" } ] }, { "slot": "tpu", "kind": "material", "label": "TPU", "verdict": "fits-with-limits", "answer": "The maker lists TPU as ideal for the A1, with two limits in Bambu's TPU guide: the AMS lite cannot feed ordinary TPU, and the A1 series cannot print TPU 85A.", "limits": [ "Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception.", "TPU 85A: Bambu marks it incompatible with the A1 series. Its table marks TPU 90A, TPU 95A HF and TPU for AMS as compatible." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Other AMS models (AMS / AMS Lite / AMS 2 Pro) are not compatible with TPU filament.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "TPU 85A TPU 90A TPU 95A HF TPU for AMS ... A1 series ❌Incompatible ✅ ✅ ✅", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "TPU for AMS filament is compatible with the standard feeding functionality of all AMS series models", "accessed": "2026-10-11" } ] }, { "slot": "pva", "kind": "material", "label": "PVA / support", "verdict": "fits", "answer": "The maker lists PVA as ideal for the A1.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "abs-asa", "kind": "material", "label": "ABS and ASA", "verdict": "not-recommended", "answer": "The maker lists ABS and ASA as not recommended for the A1.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "pc", "kind": "material", "label": "Polycarbonate (PC)", "verdict": "not-recommended", "answer": "The maker lists PC as not recommended for the A1.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "cf-gf", "kind": "material", "label": "Carbon and glass-fibre filled", "verdict": null, "answer": "Bambu's own pages disagree. The A1 product page lists carbon and glass-fibre filled filament as not recommended. Bambu's filament guide lists PLA-CF and PLA-GF as compatible with open-frame A Series printers such as the A1. We can't tell you which applies, so we give no verdict.", "limits": [ "Whichever page you follow, Bambu says these filaments need a hardened steel nozzle. The A1 ships with a stainless steel nozzle, which Bambu says wears out quickly with them.", "Fitting a hardened nozzle meets that one requirement. It doesn't settle the disagreement between Bambu's two pages.", "For nylon (PA), PET and PPA filled with carbon or glass fibre, the A1 page warns of weaker layers and more warping on large prints, and says they suit small prints with low infill." ], "state": "conflict", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Open-frame printer (A Series, P1P, etc. ) ... PLA-CF/GF Compatible Compatible", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "their CF/GF reinforced materials ... Not prone to warping; no mandatory temperature requirements Open-frame or enclosed printer", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "When printing filaments containing hard particles (CF, GF, etc.) ... it is necessary to replace the nozzle with hardened steel to prevent excessive wear", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "risk of reduced interlayer strength and increased warping for large-sized models", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "PA-CF/GF, PET-CF/GF, PPA-CF/GF", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "can be used on the A1 to print small-sized models with low filling density", "accessed": "2026-10-11" } ] }, { "slot": "nozzle-system", "kind": "wear", "label": "Nozzle system", "verdict": null, "answer": "On the A series (A2L, A1, A1 mini) the nozzle detaches from the heating assembly, so the nozzle can be replaced on its own.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "The A series nozzle is easily detached from the heating assembly ... Compatibility: A2L/ A1 / A1 mini", "accessed": "2026-10-11" } ] }, { "slot": "stock-nozzle", "kind": "wear", "label": "Stock nozzle", "verdict": null, "answer": "The A1 ships with a 0.4 mm stainless steel nozzle.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "Hot End All-Metal Nozzle Stainless Steel Max Hot End Temperature 300 °C Nozzle Diameter 0.4 mm (Included)", "accessed": "2026-10-11" } ] }, { "slot": "hardened", "kind": "wear", "label": "Hardened-nozzle guidance", "verdict": null, "answer": "Bambu says filament with hard particles such as carbon or glass fibre needs a hardened steel nozzle in place of the stock stainless one.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1", "publisher": "Bambu Lab", "quote": "When printing filaments containing hard particles (CF, GF, etc.) ... it is necessary to replace the nozzle with hardened steel to prevent excessive wear", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "A series printer comes standard with a 0.4mm stainless steel nozzle, and a hardened steel nozzle can be upgraded to an optional upgrade.", "accessed": "2026-10-11" } ] }, { "slot": "ptfe", "kind": "wear", "label": "PTFE tube", "verdict": null, "answer": "PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "Under normal usage, we recommend replacing the tube every two months", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month", "accessed": "2026-10-11" } ] }, { "slot": "plate", "kind": "wear", "label": "Stock build plate", "verdict": null, "answer": "The A1 comes with a textured PEI plate.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/a1/manual/intro-a1", "publisher": "Bambu Lab", "quote": "The A1 comes with a textured PEI plate (included in the unboxing package)", "accessed": "2026-10-11" } ] }, { "slot": "belts", "kind": "wear", "label": "Belts", "verdict": null, "answer": "The A1 has 3 adjustable belt tensioners. It checks belt tension when it prepares to print and prompts you to re-tension a belt when needed; you do the tensioning.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/a1/manual/intro-a1", "publisher": "Bambu Lab", "quote": "The A1 is equipped with 3 adjustable belt tensioners.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/a1/maintenance/belt_tension", "publisher": "Bambu Lab", "quote": "If re-tensioning is confirmed to be necessary, the printer will display a relevant prompt. Please follow the prompt to tension the corresponding belt", "accessed": "2026-10-11" } ] } ] }, { "slug": "bambu-lab-a1-mini", "brand": "Bambu Lab", "name": "Bambu Lab A1 mini", "lifecycle": "current", "page": "https://replacementhq.co.uk/3d-printing/compatibility/printers/bambu-lab/a1-mini/", "answers": [ { "slot": "pla", "kind": "material", "label": "PLA", "verdict": "fits", "answer": "The maker lists PLA as ideal for the A1 mini.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "petg", "kind": "material", "label": "PETG", "verdict": "fits-with-limits", "answer": "The maker lists PETG as ideal for the A1 mini.", "limits": [ "The A1 mini is open-frame; the maker recommends an enclosed printer for PETG." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Note : For PETG and PETG-CF/GF, an enclosed printer is recommended to prevent low ambient temperatures from reducing the model's interlayer strength.", "accessed": "2026-10-11" } ] }, { "slot": "tpu", "kind": "material", "label": "TPU", "verdict": "fits-with-limits", "answer": "The maker lists TPU as ideal for the A1 mini, with two limits in Bambu's TPU guide: the AMS lite cannot feed ordinary TPU, and the A1 series cannot print TPU 85A.", "limits": [ "Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception.", "TPU 85A: Bambu marks it incompatible with the A1 series. Its table marks TPU 90A, TPU 95A HF and TPU for AMS as compatible." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Other AMS models (AMS / AMS Lite / AMS 2 Pro) are not compatible with TPU filament.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "TPU 85A TPU 90A TPU 95A HF TPU for AMS ... A1 series ❌Incompatible ✅ ✅ ✅", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "TPU for AMS filament is compatible with the standard feeding functionality of all AMS series models", "accessed": "2026-10-11" } ] }, { "slot": "pva", "kind": "material", "label": "PVA / support", "verdict": "fits", "answer": "The maker lists PVA as ideal for the A1 mini.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "abs-asa", "kind": "material", "label": "ABS and ASA", "verdict": "not-recommended", "answer": "The maker lists ABS and ASA as not recommended for the A1 mini.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "pc", "kind": "material", "label": "Polycarbonate (PC)", "verdict": "not-recommended", "answer": "The maker lists PC as not recommended for the A1 mini.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" } ] }, { "slot": "cf-gf", "kind": "material", "label": "Carbon and glass-fibre filled", "verdict": null, "answer": "Bambu's own pages disagree. The A1 mini product page lists carbon and glass-fibre filled filament as not recommended. Bambu's filament guide lists PLA-CF and PLA-GF as compatible with open-frame A Series printers such as the A1 mini. We can't tell you which applies, so we give no verdict.", "limits": [ "Whichever page you follow, Bambu says these filaments need a hardened steel nozzle. The A1 mini ships with a stainless steel nozzle, which Bambu says wears out quickly with them.", "Fitting a hardened nozzle meets that one requirement. It doesn't settle the disagreement between Bambu's two pages.", "For nylon (PA) filled with carbon or glass fibre, Bambu's guide marks open-frame printers such as the A1 mini as not recommended." ], "state": "conflict", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Open-frame printer (A Series, P1P, etc. ) ... PLA-CF/GF Compatible Compatible", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "their CF/GF reinforced materials ... Not prone to warping; no mandatory temperature requirements Open-frame or enclosed printer", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Hot End All-Metal Nozzle Stainless Steel Max Hot End Temperature 300 °C Nozzle Diameter 0.4 mm (Included)", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "PA-CF/GF PA6-CF/GF PAHT-CF/GF Not Recommended Recommended", "accessed": "2026-10-11" } ] }, { "slot": "nozzle-system", "kind": "wear", "label": "Nozzle system", "verdict": null, "answer": "On the A series (A2L, A1, A1 mini) the nozzle detaches from the heating assembly, so the nozzle can be replaced on its own.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "The A series nozzle is easily detached from the heating assembly ... Compatibility: A2L/ A1 / A1 mini", "accessed": "2026-10-11" } ] }, { "slot": "stock-nozzle", "kind": "wear", "label": "Stock nozzle", "verdict": null, "answer": "The A1 mini ships with a 0.4 mm stainless steel nozzle.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Hot End All-Metal Nozzle Stainless Steel Max Hot End Temperature 300 °C Nozzle Diameter 0.4 mm (Included)", "accessed": "2026-10-11" } ] }, { "slot": "hardened", "kind": "wear", "label": "Hardened-nozzle guidance", "verdict": null, "answer": "A hardened steel nozzle is an optional upgrade on the A series. For carbon and glass-fibre filament Bambu says not to use stainless steel or brass nozzles.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "A series printer comes standard with a 0.4mm stainless steel nozzle, and a hardened steel nozzle can be upgraded to an optional upgrade.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" } ] }, { "slot": "ptfe", "kind": "wear", "label": "PTFE tube", "verdict": null, "answer": "PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "Under normal usage, we recommend replacing the tube every two months", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month", "accessed": "2026-10-11" } ] }, { "slot": "plate", "kind": "wear", "label": "Stock build plate", "verdict": null, "answer": "The A1 mini ships with a Bambu Textured PEI Plate.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/a1-mini", "publisher": "Bambu Lab", "quote": "Heatbed Build Plate Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate", "accessed": "2026-10-11" } ] }, { "slot": "belts", "kind": "wear", "label": "Belts", "verdict": null, "answer": "The A1 mini has belt tensioners for both the X and Y axes. The tool head monitors X-axis belt tension and the system prompts you to adjust it if tension is abnormal.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/a1-mini/manual/intro-a1-mini", "publisher": "Bambu Lab", "quote": "The A1 mini has belt tensioners for both the X and Y axes.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/a1-mini/manual/intro-a1-mini", "publisher": "Bambu Lab", "quote": "If there is an abnormality in the tension force of the X-axis belt, the system will prompt you to adjust the tension.", "accessed": "2026-10-11" } ] } ] }, { "slug": "bambu-lab-p1s", "brand": "Bambu Lab", "name": "Bambu Lab P1S", "lifecycle": "current", "page": "https://replacementhq.co.uk/3d-printing/compatibility/printers/bambu-lab/p1s/", "answers": [ { "slot": "pla", "kind": "material", "label": "PLA", "verdict": "fits", "answer": "The maker lists PLA as ideal for the P1S.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/p1s", "publisher": "Bambu Lab", "quote": "Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA Capable: PA, PC", "accessed": "2026-10-11" } ] }, { "slot": "petg", "kind": "material", "label": "PETG", "verdict": "fits", "answer": "The maker lists PETG as ideal for the P1S.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/p1s", "publisher": "Bambu Lab", "quote": "Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA Capable: PA, PC", "accessed": "2026-10-11" } ] }, { "slot": "tpu", "kind": "material", "label": "TPU", "verdict": "fits-with-limits", "answer": "The maker lists TPU as ideal for the P1S. Bambu's TPU guide adds that the AMS and AMS 2 Pro cannot feed ordinary TPU.", "limits": [ "Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception.", "Bambu says its printers don't currently support TPU softer than 85A." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/p1s", "publisher": "Bambu Lab", "quote": "Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA Capable: PA, PC", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Other AMS models (AMS / AMS Lite / AMS 2 Pro) are not compatible with TPU filament.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "TPU for AMS filament is compatible with the standard feeding functionality of all AMS series models", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Bambu Lab printers do not currently support printing with TPU filaments rated below 85A hardness.", "accessed": "2026-10-11" } ] }, { "slot": "abs-asa", "kind": "material", "label": "ABS and ASA", "verdict": "fits", "answer": "Bambu recommends an enclosed printer for ABS and ASA and names the P1S as one.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "pa", "kind": "material", "label": "Nylon (PA)", "verdict": "fits-with-limits", "answer": "The maker lists PA as capable, not ideal, for the P1S.", "limits": [ "Bambu lists PA as Capable, not Ideal, for the P1S.", "Bambu says PA needs higher bed and chamber temperatures to suppress warping and layer separation." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/p1s", "publisher": "Bambu Lab", "quote": "Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA Capable: PA, PC", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "pc", "kind": "material", "label": "Polycarbonate (PC)", "verdict": "fits-with-limits", "answer": "The maker lists PC as capable, not ideal, for the P1S.", "limits": [ "Bambu lists PC as Capable, not Ideal, for the P1S.", "Bambu says PC needs higher bed and chamber temperatures to suppress warping and layer separation." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/p1s", "publisher": "Bambu Lab", "quote": "Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA Capable: PA, PC", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "cf-gf", "kind": "material", "label": "Carbon and glass-fibre filled", "verdict": "not-recommended", "answer": "Bambu does not recommend printing fibre-reinforced filament on the P1S directly.", "limits": [ "The maker's condition is an extruder and hotend upgrade first." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/p1s", "publisher": "Bambu Lab", "quote": "it is not recommended to directly print fiber-reinforced filaments such as glass fiber or carbon fiber, before an extruder and hotend upgrade is done", "accessed": "2026-10-11" } ] }, { "slot": "nozzle-system", "kind": "wear", "label": "Nozzle system", "verdict": null, "answer": "The nozzle can be replaced as a Hotend with Nozzle or as a Complete Hotend Assembly; both are made for the X1 and P1 series.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend", "publisher": "Bambu Lab", "quote": "If you need to change the nozzle, you can either replace the Hotend with Nozzle or the entire Complete Hotend Assembly.", "accessed": "2026-10-11" } ] }, { "slot": "stock-nozzle", "kind": "wear", "label": "Stock nozzle", "verdict": null, "answer": "The P1S ships with a 0.4 mm stainless steel nozzle.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle", "accessed": "2026-10-11" } ] }, { "slot": "hardened", "kind": "wear", "label": "Hardened-nozzle guidance", "verdict": null, "answer": "For carbon and glass-fibre filament Bambu says not to use stainless steel or brass nozzles; the P1S stock nozzle is stainless steel.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle", "accessed": "2026-10-11" } ] }, { "slot": "ptfe", "kind": "wear", "label": "PTFE tube", "verdict": null, "answer": "Inside the P1S, above the toolhead, the maker lists one 550 mm tube, 2.0 mm inner and 4.0 mm outer diameter. PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "X1 / P1 Tube Location Qty Length ID / OD Inside X1 / P1S printer, above the toolhead 1 550 mm 2.0 / 4.0 mm", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "Under normal usage, we recommend replacing the tube every two months", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month", "accessed": "2026-10-11" } ] }, { "slot": "plate", "kind": "wear", "label": "Stock build plate", "verdict": null, "answer": "The P1S comes with a Textured PEI Plate pre-installed on the hotbed.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/p1/manual/p1s-acc-in-the-box", "publisher": "Bambu Lab", "quote": "Textured PEI Plate (pre-installed on the hotbed)", "accessed": "2026-10-11" } ] }, { "slot": "belts", "kind": "wear", "label": "Belts", "verdict": null, "answer": "The X1 and P1 series use a spring belt tensioner: loosen the 4 screws, move the toolhead back and forth, retighten, and the spring sets the tension.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/x1/maintenance/belt-tension", "publisher": "Bambu Lab", "quote": "Applicable Printer Models X1 Series P1 Series ... The spring system in the belt-tensioner will tighten the belt to the correct tension.", "accessed": "2026-10-11" } ] } ] }, { "slug": "bambu-lab-h2d", "brand": "Bambu Lab", "name": "Bambu Lab H2D", "lifecycle": "current", "page": "https://replacementhq.co.uk/3d-printing/compatibility/printers/bambu-lab/h2d/", "answers": [ { "slot": "pla", "kind": "material", "label": "PLA", "verdict": "fits", "answer": "Bambu lists PLA as suitable for open-frame or enclosed printers and names the H2 series as enclosed.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "petg", "kind": "material", "label": "PETG", "verdict": "fits-with-limits", "answer": "Bambu lists PETG as suitable for open-frame or enclosed printers and recommends an enclosed printer for it; the H2 series is enclosed. On the H2D, Bambu says not to print PVA and PETG at the same time on the two hotends.", "limits": [ "Do not print PVA and PETG at the same time on the left and right hotends." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Note : For PETG and PETG-CF/GF, an enclosed printer is recommended to prevent low ambient temperatures from reducing the model's interlayer strength.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/filament/h2d-filament-config-limit", "publisher": "Bambu Lab", "quote": "PVA and PETG Should Not Be Printed Simultaneously Using Left and Right Hotends", "accessed": "2026-10-11" } ] }, { "slot": "tpu", "kind": "material", "label": "TPU", "verdict": "fits-with-limits", "answer": "Bambu lists TPU as suitable for open-frame or enclosed printers and names the H2 series as enclosed. Its TPU guide adds that the AMS and AMS 2 Pro cannot feed ordinary TPU; only the AMS HT can hold it, fed through its own TPU outlet.", "limits": [ "Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception. The AMS HT can hold TPU but only as a sealed box, fed through its rear TPU outlet.", "Bambu says its printers don't currently support TPU softer than 85A." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Other AMS models (AMS / AMS Lite / AMS 2 Pro) are not compatible with TPU filament.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "TPU for AMS filament is compatible with the standard feeding functionality of all AMS series models", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Among the AMS series, only the AMS HT supports printing with TPU filament.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "When printing with TPU, the AMS HT functions solely as a sealed enclosure", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "the filament must be fed through the dedicated TPU outlet located on the back of the unit", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/ams-ht", "publisher": "Bambu Lab", "quote": "The AMS HT will be compatible with all Bambu Lab products", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Bambu Lab printers do not currently support printing with TPU filaments rated below 85A hardness.", "accessed": "2026-10-11" } ] }, { "slot": "pva", "kind": "material", "label": "PVA / support", "verdict": "fits-with-limits", "answer": "The H2D has two hotends. Bambu says PVA and PETG should not be printed at the same time on the left and right hotends.", "limits": [ "Do not print PVA and PETG at the same time on the left and right hotends." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/filament/h2d-filament-config-limit", "publisher": "Bambu Lab", "quote": "PVA and PETG Should Not Be Printed Simultaneously Using Left and Right Hotends", "accessed": "2026-10-11" } ] }, { "slot": "abs-asa", "kind": "material", "label": "ABS and ASA", "verdict": "fits", "answer": "Bambu recommends an enclosed printer for ABS and ASA and names the H2 series as enclosed; the H2D has 65°C active chamber heating.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/h2d", "publisher": "Bambu Lab", "quote": "350°C Hotend & 65°C Chamber Heating", "accessed": "2026-10-11" } ] }, { "slot": "pa-pc", "kind": "material", "label": "Nylon (PA) and polycarbonate (PC)", "verdict": "fits", "answer": "Bambu recommends an enclosed printer for PA and PC and names the H2 series as enclosed.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "cf-gf", "kind": "material", "label": "Carbon and glass-fibre filled", "verdict": "fits", "answer": "The H2D ships with a hardened steel nozzle and a hardened steel extruder gear.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/h2d", "publisher": "Bambu Lab", "quote": "Extruder Gear Hardened Steel Nozzle Hardened Steel Max Nozzle Temperature 350 °C", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" } ] }, { "slot": "nozzle-system", "kind": "wear", "label": "Nozzle system", "verdict": null, "answer": "The H2D hotend has a quick-swap design: unlock the latch to remove or install the hotend.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "This hotend features a quick swap design, which enables easy separation of the thermal and electronic components of the hotend. Simply unlock the latch", "accessed": "2026-10-11" } ] }, { "slot": "stock-nozzle", "kind": "wear", "label": "Stock nozzle", "verdict": null, "answer": "The H2D ships with a 0.4 mm hardened steel nozzle.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://uk.store.bambulab.com/products/h2d", "publisher": "Bambu Lab", "quote": "Nozzle Hardened Steel Max Nozzle Temperature 350 °C Included Nozzle Diameter 0.4 mm", "accessed": "2026-10-11" } ] }, { "slot": "hardened", "kind": "wear", "label": "Hardened-nozzle guidance", "verdict": null, "answer": "For carbon and glass-fibre filament Bambu says not to use stainless steel or brass nozzles; the H2D stock nozzle is hardened steel.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/h2d", "publisher": "Bambu Lab", "quote": "Nozzle Hardened Steel Max Nozzle Temperature 350 °C", "accessed": "2026-10-11" } ] }, { "slot": "ptfe", "kind": "wear", "label": "PTFE tube", "verdict": null, "answer": "For the H2D the maker lists an AMS to filament buffer tube of 900 mm (no less than 600 mm recommended), 2.5 mm inner and 4.0 mm outer diameter. PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "H2C / H2D Tube Location Qty Length ID / OD", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "AMS → Filament Buffer 1 900 mm (recommended no less than 600 mm) 2.5 / 4.0 mm", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "Under normal usage, we recommend replacing the tube every two months", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month", "accessed": "2026-10-11" } ] }, { "slot": "plate", "kind": "wear", "label": "Stock build plate", "verdict": null, "answer": "The H2D series comes with a Textured PEI Plate.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/h2/manual/h2d-intro", "publisher": "Bambu Lab", "quote": "The H2D series printer comes with a Textured PEI Plate.", "accessed": "2026-10-11" } ] }, { "slot": "belts", "kind": "wear", "label": "Belts", "verdict": null, "answer": "The H2D has an adjustable belt tensioner on the rear, and a Belt Tension Monitor that gives feedback so you can adjust tension.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/h2/manual/h2d-intro", "publisher": "Bambu Lab", "quote": "The H2D has an adjustable belt tensioner on the rear. The Belt Tension Monitor (BTM) will monitor the tension of the belt", "accessed": "2026-10-11" } ] } ] }, { "slug": "bambu-lab-x1c", "brand": "Bambu Lab", "name": "Bambu Lab X1 Carbon (X1C)", "lifecycle": "legacy", "page": "https://replacementhq.co.uk/3d-printing/compatibility/printers/bambu-lab/x1c/", "legacy": { "endOfLife": "2026-03-31", "supportUntil": "2031-03-31", "source": "https://blog.bambulab.com/the-x1-series-is-eol-the-standard-it-set-will-remain-forever" }, "answers": [ { "slot": "pla", "kind": "material", "label": "PLA", "verdict": "fits", "answer": "Bambu lists PLA as suitable for open-frame or enclosed printers and names the X1C as enclosed.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "petg", "kind": "material", "label": "PETG", "verdict": "fits", "answer": "Bambu lists PETG as suitable for open-frame or enclosed printers, recommends an enclosed printer for it, and names the X1C as enclosed.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Note : For PETG and PETG-CF/GF, an enclosed printer is recommended to prevent low ambient temperatures from reducing the model's interlayer strength.", "accessed": "2026-10-11" } ] }, { "slot": "tpu", "kind": "material", "label": "TPU", "verdict": "fits-with-limits", "answer": "Bambu lists TPU as suitable for open-frame or enclosed printers and names the X1C as enclosed. Its TPU guide adds that the AMS and AMS 2 Pro cannot feed ordinary TPU; only the AMS HT can hold it, fed through its own TPU outlet.", "limits": [ "Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception. The AMS HT can hold TPU but only as a sealed box, fed through its rear TPU outlet. To connect an AMS HT to an X1-series printer, Bambu says you need a Filament Buffer or AMS Hub, a PTFE tube coupler and a 4-pin cable.", "Bambu says its printers don't currently support TPU softer than 85A." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Other AMS models (AMS / AMS Lite / AMS 2 Pro) are not compatible with TPU filament.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "TPU for AMS filament is compatible with the standard feeding functionality of all AMS series models", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Among the AMS series, only the AMS HT supports printing with TPU filament.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "When printing with TPU, the AMS HT functions solely as a sealed enclosure", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "the filament must be fed through the dedicated TPU outlet located on the back of the unit", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/ams-ht", "publisher": "Bambu Lab", "quote": "To connect a single AMS HT unit to X1/P1 series printer, a Filament Buffer(SA003) or AMS Hub(SA002-N)", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/ams-ht", "publisher": "Bambu Lab", "quote": "a PTFE Tube Coupler(FAZ006)", "accessed": "2026-10-11" }, { "url": "https://uk.store.bambulab.com/products/ams-ht", "publisher": "Bambu Lab", "quote": "and a 4-pin Cable(CAB002-N) are required", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide", "publisher": "Bambu Lab", "quote": "Bambu Lab printers do not currently support printing with TPU filaments rated below 85A hardness.", "accessed": "2026-10-11" } ] }, { "slot": "abs-asa", "kind": "material", "label": "ABS and ASA", "verdict": "fits", "answer": "Bambu recommends an enclosed printer for ABS and ASA and names the X1C as one.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "pa", "kind": "material", "label": "Nylon (PA)", "verdict": "fits", "answer": "Bambu recommends an enclosed printer for PA and names the X1C as one.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "pc", "kind": "material", "label": "Polycarbonate (PC)", "verdict": "fits", "answer": "Bambu recommends an enclosed printer for PC and names the X1C as one.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "ABS, ASA, PC, PA, and their CF/GF reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Require higher heatbed and chamber temperatures to suppress warping and layer separation", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )", "accessed": "2026-10-11" } ] }, { "slot": "cf-gf", "kind": "material", "label": "Carbon and glass-fibre filled", "verdict": "fits-with-limits", "answer": "The X1C ships with a hardened steel nozzle. Bambu says carbon and glass-fibre filament needs a hardened steel nozzle.", "limits": [ "Bambu does not publish whether the X1C extruder gear is hardened." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" } ] }, { "slot": "nozzle-system", "kind": "wear", "label": "Nozzle system", "verdict": null, "answer": "The nozzle can be replaced as a Hotend with Nozzle or as a Complete Hotend Assembly. The X1 series has its own Complete Hotend Assembly.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend", "publisher": "Bambu Lab", "quote": "If you need to change the nozzle, you can either replace the Hotend with Nozzle or the entire Complete Hotend Assembly.", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend", "publisher": "Bambu Lab", "quote": "Complete Hotend Assembly - X1 Series (Note: It is compatible only with X1 and X1C, not with X1E.)", "accessed": "2026-10-11" } ] }, { "slot": "stock-nozzle", "kind": "wear", "label": "Stock nozzle", "verdict": null, "answer": "The X1C ships with a 0.4 mm hardened steel nozzle.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle", "accessed": "2026-10-11" } ] }, { "slot": "hardened", "kind": "wear", "label": "Hardened-nozzle guidance", "verdict": null, "answer": "For carbon and glass-fibre filament Bambu says not to use stainless steel or brass nozzles; the X1C stock nozzle is hardened steel.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "When printing carbon fiber or glass fiber-reinforced materials", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/general/filament-guide-material-table", "publisher": "Bambu Lab", "quote": "Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/nozzles", "publisher": "Bambu Lab", "quote": "P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle", "accessed": "2026-10-11" } ] }, { "slot": "ptfe", "kind": "wear", "label": "PTFE tube", "verdict": null, "answer": "Inside the X1 and P1S, above the toolhead, the maker lists one 550 mm tube, 2.0 mm inner and 4.0 mm outer diameter. PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "X1 / P1 Tube Location Qty Length ID / OD Inside X1 / P1S printer, above the toolhead 1 550 mm 2.0 / 4.0 mm", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "Under normal usage, we recommend replacing the tube every two months", "accessed": "2026-10-11" }, { "url": "https://wiki.bambulab.com/en/filament-acc/acc/ptfe-tube", "publisher": "Bambu Lab", "quote": "When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month", "accessed": "2026-10-11" } ] }, { "slot": "plate", "kind": "wear", "label": "Stock build plate", "verdict": null, "answer": "Varies by unit: Bambu says X1 series machines are randomly equipped with different types of build plates.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/x1/manual/intro-x1", "publisher": "Bambu Lab", "quote": "The X1 series machines are randomly equipped with different types of build plates.", "accessed": "2026-10-11" } ] }, { "slot": "belts", "kind": "wear", "label": "Belts", "verdict": null, "answer": "The X1 and P1 series use a spring belt tensioner: loosen the 4 screws, move the toolhead back and forth, retighten, and the spring sets the tension.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://wiki.bambulab.com/en/x1/maintenance/belt-tension", "publisher": "Bambu Lab", "quote": "Applicable Printer Models X1 Series P1 Series ... The spring system in the belt-tensioner will tighten the belt to the correct tension.", "accessed": "2026-10-11" } ] } ] }, { "slug": "prusa-mk4s", "brand": "Prusa", "name": "Original Prusa MK4S", "lifecycle": "current", "page": "https://replacementhq.co.uk/3d-printing/compatibility/printers/prusa/mk4s/", "answers": [ { "slot": "pla", "kind": "material", "label": "PLA", "verdict": "fits", "answer": "Prusa lists PLA among the supported materials for the MK4S.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Supported materials PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the Original Prusa Enclosure with filtration add-on ABS, ASA, HIPS, PA", "accessed": "2026-10-11" } ] }, { "slot": "petg", "kind": "material", "label": "PETG", "verdict": "fits", "answer": "Prusa lists PETG among the supported materials for the MK4S.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Supported materials PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the Original Prusa Enclosure with filtration add-on ABS, ASA, HIPS, PA", "accessed": "2026-10-11" } ] }, { "slot": "tpu", "kind": "material", "label": "Flexible (TPU)", "verdict": "fits-with-limits", "answer": "Prusa lists Flex among the supported materials for the MK4S. Its flexible-materials guide warns that automatic filament change might not work properly with flexible filaments.", "limits": [ "Prusa says automatic filament change might not work properly with flexible filaments." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Supported materials PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the Original Prusa Enclosure with filtration add-on ABS, ASA, HIPS, PA", "accessed": "2026-10-11" }, { "url": "https://help.prusa3d.com/article/flexible-materials_2057", "publisher": "Prusa Research", "quote": "Remember that automatic filament change might not work properly with flexible filaments.", "accessed": "2026-10-11" } ] }, { "slot": "pva", "kind": "material", "label": "PVA / support", "verdict": "fits", "answer": "Prusa lists PVA among the supported materials for the MK4S.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Supported materials PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the Original Prusa Enclosure with filtration add-on ABS, ASA, HIPS, PA", "accessed": "2026-10-11" } ] }, { "slot": "abs-asa", "kind": "material", "label": "ABS and ASA", "verdict": "fits-with-limits", "answer": "Prusa lists ABS and ASA for the MK4S only when using the Original Prusa Enclosure with the filtration add-on.", "limits": [ "Needs the Original Prusa Enclosure with the filtration add-on." ], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Supported materials PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the Original Prusa Enclosure with filtration add-on ABS, ASA, HIPS, PA", "accessed": "2026-10-11" } ] }, { "slot": "pc", "kind": "material", "label": "Polycarbonate (PC)", "verdict": "fits", "answer": "Prusa lists PC among the supported materials for the MK4S.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Supported materials PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the Original Prusa Enclosure with filtration add-on ABS, ASA, HIPS, PA", "accessed": "2026-10-11" } ] }, { "slot": "nozzle-system", "kind": "wear", "label": "Nozzle system", "verdict": null, "answer": "The Prusa Nozzle is designed for Nextruder-based printers including the MK4/S and is built for cold, quick swaps.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://help.prusa3d.com/article/different-nozzle-types_2193", "publisher": "Prusa Research", "quote": "Designed for Nextruder-based printers (CORE One, XL, MK4/S, MK3.9/S), the Prusa Nozzle is built for cold, quick swaps", "accessed": "2026-10-11" } ] }, { "slot": "stock-nozzle", "kind": "wear", "label": "Stock nozzle", "verdict": null, "answer": "The MK4S ships with the High-flow Prusa Nozzle, brass CHT, 0.4 mm.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Nozzle High-flow Prusa Nozzle brass CHT - 0.4 mm", "accessed": "2026-10-11" } ] }, { "slot": "hardened", "kind": "wear", "label": "Hardened-nozzle guidance", "verdict": null, "answer": "For carbon-fibre, Kevlar and glass-filled composites Prusa lists a hardened steel nozzle as needed.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://help.prusa3d.com/article/composite-materials-filled-with-carbon-kevlar-or-glass_167387", "publisher": "Prusa Research", "quote": "✖ A hardened steel nozzle is needed", "accessed": "2026-10-11" } ] }, { "slot": "hotend-path", "kind": "wear", "label": "Extruder and filament path", "verdict": null, "answer": "The MK4S has a Nextruder direct-drive extruder and an all-metal hotend.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Extruder Nextruder, Direct Drive, E3D V6 compatible (with adapter) ... Filament path Aluminum heatsink, all-metal hotend", "accessed": "2026-10-11" } ] }, { "slot": "plate", "kind": "wear", "label": "Stock build plate", "verdict": null, "answer": "The MK4S comes with a smooth PEI steel sheet.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/", "publisher": "Prusa Research", "quote": "Provided steel sheet Smooth PEI", "accessed": "2026-10-11" } ] }, { "slot": "belts", "kind": "wear", "label": "Belts", "verdict": null, "answer": "Prusa publishes a belt-tension maintenance article that covers the MK4/S.", "limits": [], "state": "verified", "verifiedOn": "2026-10-11", "sources": [ { "url": "https://help.prusa3d.com/product/mk4/drucker-wartung_247", "publisher": "Prusa Research", "quote": "Adjusting belt tension (MK4/S, MK3.9/S, MK3.5/S, MK3/S/+)", "accessed": "2026-10-11" } ] } ] } ] }