ReplacementHQAccessibility

Home3D printingBambu LabX1 Carbon

Bambu Lab X1 Carbon (X1C)

The materials it can print and the parts that wear out. 13 answers, all from Bambu Lab's own information.

Type
Enclosed
Status
Legacy
Answers
13
Checked
18 November 2026
Legacy

Legacy printer. Bambu Lab ended manufacture and active sales of the X1 series on 31 March 2026. Bambu says it will support the X1 series until 31 March 2031. See Bambu Lab's current printers.

Bambu Lab's notice

The X1-series is EOL (Bambu Lab blog), checked 18 November 2026.

Machines already in users' hands will keep working, supported until March 31, 2031
End of manufacturing and active sales = 2026-03-31

Part-by-part answers for the X1 Carbon aren't ready yet. The answers below cover the materials it can print and the parts that wear out, from Bambu Lab's own information.

What the Bambu Lab X1 Carbon (X1C) takes, part by part

Legacy · generic drawing
MATERIAL · TPUCHECKED 18 NOVEMBER 2026

Can the Bambu Lab X1 Carbon (X1C) print TPU?

Fits, with limits

Bambu lists TPU as suitable for open-frame or enclosed printers and names the X1C as enclosed. Its TPU guide adds that the AMS and AMS 2 Pro cannot feed ordinary TPU. To hold it, Bambu names the AMS HT, used only as a sealed box and fed through its rear TPU outlet, or a filament dry box.

Limits

  1. Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception. The AMS HT can hold TPU but only as a sealed box, fed through its rear TPU outlet. Bambu also names a filament dry box. Bambu's newer AMS 3H must be used with an H3C printer. To connect an AMS HT to an X1-series printer, Bambu says you need a Filament Buffer or AMS Hub, a PTFE tube coupler and a 4-pin cable.
  2. Bambu's TPU table marks TPU 75A, a softer grade on 2.85 mm filament, as not compatible with the X series, which includes the X1C.
  3. Bambu says not to use the Cool Plate SuperTack to print TPU.
SOURCES 10 quotes from the maker, checked 18 November 2026
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

  2. SRC 02 TPU printing guide (Bambu Lab Wiki)

    AMS 2 Pro AMS lite AMS ... TPU 85A ❌ ✅ ✅ ❌ ⚠️ ❌ ❌ ❌

    How to read this: Bambu's AMS table: the AMS 2 Pro, AMS lite and AMS are its last three columns, and the last three marks on the TPU 85A row are ❌ (not usable). On the source page the TPU 75A, 90A and 95A HF rows end with the same three ❌ marks.

    Bambu Lab · checked 18 November 2026

  3. SRC 03 TPU printing guide (Bambu Lab Wiki)

    TPU for AMS: Can be printed using the regular automatic feeding function of all AMS series products.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 TPU printing guide (Bambu Lab Wiki)

    AMS HT: Use it only as a sealed container. Feed the filament through the TPU outlet on the back.

    Bambu Lab · checked 18 November 2026

  5. SRC 05 TPU printing guide (Bambu Lab Wiki)

    AMS 3H Must be used with an Bambu Lab H3C printer. For other models, use AMS HT or a filament dry box.

    Bambu Lab · checked 18 November 2026

  6. SRC 06 Bambu Lab AMS HT (UK store)

    To connect a single AMS HT unit to X1/P1 series printer, a Filament Buffer(SA003) or AMS Hub(SA002-N)

    Bambu Lab · checked 18 November 2026

  7. SRC 07 Bambu Lab AMS HT (UK store)

    a PTFE Tube Coupler(FAZ006)

    Bambu Lab · checked 18 November 2026

  8. SRC 08 Bambu Lab AMS HT (UK store)

    and a 4-pin Cable(CAB002-N) are required

    Bambu Lab · checked 18 November 2026

  9. SRC 09 TPU printing guide (Bambu Lab Wiki)

    TPU 75A( 2.85 mm) TPU 85A TPU 90A TPU 95A HF TPU for AMS H2, X, and P Series ❌ ✅ ✅ ✅ ✅

    How to read this: Bambu's printer table: each mark is one TPU grade in the order of the headings. For the H2, X and P series, TPU 75A is marked ❌ (not compatible) and the other four ✅.

    Bambu Lab · checked 18 November 2026

  10. SRC 10 TPU printing guide (Bambu Lab Wiki)

    Do not use the Cool Plate SuperTack to print TPU.

    Bambu Lab · checked 18 November 2026

Every answer for the X1 Carbon

We have 13 answers for the Bambu Lab X1 Carbon (X1C): 7 on materials and 6 on parts that wear out. Each one quotes Bambu Lab's own information. We last checked them on 18 November 2026. We haven't physically tested this printer. How we check answers.

Parts that wear out

Nozzle system on the Bambu Lab X1 Carbon (X1C)

Maker fact

The nozzle can be replaced as a Hotend with Nozzle or as a Complete Hotend Assembly. The X1 series has its own Complete Hotend Assembly.

2 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Replace the hotend, X1 and P1 (Bambu Lab Wiki)

    If you need to change the nozzle, you can either replace the Hotend with Nozzle or the entire Complete Hotend Assembly.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Replace the hotend, X1 and P1 (Bambu Lab Wiki)

    Complete Hotend Assembly - X1 Series (Note: It is compatible only with X1 and X1C, not with X1E.)

    Bambu Lab · checked 18 November 2026

Stock nozzle on the Bambu Lab X1 Carbon (X1C)

Maker fact

The X1C ships with a 0.4 mm hardened steel nozzle.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Nozzles (Bambu Lab Wiki)

    P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle

    Bambu Lab · checked 18 November 2026

Hardened-nozzle guidance on the Bambu Lab X1 Carbon (X1C)

Maker fact

For carbon and glass-fibre filament Bambu says not to use stainless steel or brass nozzles; the X1C stock nozzle is hardened steel.

3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    When printing carbon fiber or glass fiber-reinforced materials

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Nozzles (Bambu Lab Wiki)

    P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle

    Bambu Lab · checked 18 November 2026

Stock build plate on the Bambu Lab X1 Carbon (X1C)

Maker fact

Varies by unit: Bambu says X1 series machines are randomly equipped with different types of build plates.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Introduction to the X1 (Bambu Lab Wiki)

    The X1 series machines are randomly equipped with different types of build plates.

    Bambu Lab · checked 18 November 2026

PTFE tube on the Bambu Lab X1 Carbon (X1C)

Maker fact

Inside the X1 and P1S, above the toolhead, the maker lists one 550 mm tube, 2.5 mm inner and 4.0 mm outer diameter. PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.

4 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 PTFE tube (Bambu Lab Wiki)

    X1 / P1 Tube Location Qty Length ID / OD Inside X1 / P1S printer, above the toolhead 1 550 mm 2.5 / 4.0 mm

    Bambu Lab · checked 18 November 2026

  2. SRC 02 PTFE tube (Bambu Lab Wiki)

    routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead

    Bambu Lab · checked 18 November 2026

  3. SRC 03 PTFE tube (Bambu Lab Wiki)

    Under normal usage, we recommend replacing the tube every two months

    Bambu Lab · checked 18 November 2026

  4. SRC 04 PTFE tube (Bambu Lab Wiki)

    When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month

    Bambu Lab · checked 18 November 2026

Belts on the Bambu Lab X1 Carbon (X1C)

Maker fact

The X1 and P1 series use a spring belt tensioner: loosen the 4 screws, move the toolhead back and forth, retighten, and the spring sets the tension.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 X1 and P1 belt tension (Bambu Lab Wiki)

    Applicable Printer Models X1 Series P1 Series ... The spring system in the belt-tensioner will tighten the belt to the correct tension.

    Bambu Lab · checked 18 November 2026

Which materials can the X1 Carbon print?

Can the Bambu Lab X1 Carbon (X1C) print PLA?

Fits

Bambu lists PLA as suitable for open-frame or enclosed printers and names the X1C as enclosed.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X1 Carbon (X1C) print PETG?

Fits

Bambu lists PETG as suitable for open-frame or enclosed printers, recommends an enclosed printer for it, and names the X1C as enclosed.

2 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Note : For PETG and PETG-CF/GF, an enclosed printer is recommended to prevent low ambient temperatures from reducing the model's interlayer strength.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X1 Carbon (X1C) print TPU?

Fits, with limits

Bambu lists TPU as suitable for open-frame or enclosed printers and names the X1C as enclosed. Its TPU guide adds that the AMS and AMS 2 Pro cannot feed ordinary TPU. To hold it, Bambu names the AMS HT, used only as a sealed box and fed through its rear TPU outlet, or a filament dry box.

Limits

  1. Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception. The AMS HT can hold TPU but only as a sealed box, fed through its rear TPU outlet. Bambu also names a filament dry box. Bambu's newer AMS 3H must be used with an H3C printer. To connect an AMS HT to an X1-series printer, Bambu says you need a Filament Buffer or AMS Hub, a PTFE tube coupler and a 4-pin cable.
  2. Bambu's TPU table marks TPU 75A, a softer grade on 2.85 mm filament, as not compatible with the X series, which includes the X1C.
  3. Bambu says not to use the Cool Plate SuperTack to print TPU.
10 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    PLA, PETG, TPU, and their CF/GF reinforced materials ... Open-frame or enclosed printer ... Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

  2. SRC 02 TPU printing guide (Bambu Lab Wiki)

    AMS 2 Pro AMS lite AMS ... TPU 85A ❌ ✅ ✅ ❌ ⚠️ ❌ ❌ ❌

    How to read this: Bambu's AMS table: the AMS 2 Pro, AMS lite and AMS are its last three columns, and the last three marks on the TPU 85A row are ❌ (not usable). On the source page the TPU 75A, 90A and 95A HF rows end with the same three ❌ marks.

    Bambu Lab · checked 18 November 2026

  3. SRC 03 TPU printing guide (Bambu Lab Wiki)

    TPU for AMS: Can be printed using the regular automatic feeding function of all AMS series products.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 TPU printing guide (Bambu Lab Wiki)

    AMS HT: Use it only as a sealed container. Feed the filament through the TPU outlet on the back.

    Bambu Lab · checked 18 November 2026

  5. SRC 05 TPU printing guide (Bambu Lab Wiki)

    AMS 3H Must be used with an Bambu Lab H3C printer. For other models, use AMS HT or a filament dry box.

    Bambu Lab · checked 18 November 2026

  6. SRC 06 Bambu Lab AMS HT (UK store)

    To connect a single AMS HT unit to X1/P1 series printer, a Filament Buffer(SA003) or AMS Hub(SA002-N)

    Bambu Lab · checked 18 November 2026

  7. SRC 07 Bambu Lab AMS HT (UK store)

    a PTFE Tube Coupler(FAZ006)

    Bambu Lab · checked 18 November 2026

  8. SRC 08 Bambu Lab AMS HT (UK store)

    and a 4-pin Cable(CAB002-N) are required

    Bambu Lab · checked 18 November 2026

  9. SRC 09 TPU printing guide (Bambu Lab Wiki)

    TPU 75A( 2.85 mm) TPU 85A TPU 90A TPU 95A HF TPU for AMS H2, X, and P Series ❌ ✅ ✅ ✅ ✅

    How to read this: Bambu's printer table: each mark is one TPU grade in the order of the headings. For the H2, X and P series, TPU 75A is marked ❌ (not compatible) and the other four ✅.

    Bambu Lab · checked 18 November 2026

  10. SRC 10 TPU printing guide (Bambu Lab Wiki)

    Do not use the Cool Plate SuperTack to print TPU.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X1 Carbon (X1C) print ABS and ASA?

Fits

Bambu recommends an enclosed printer for ABS and ASA and names the X1C as one.

3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    ABS, ASA, PC, PA, and their CF/GF reinforced materials

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Require higher heatbed and chamber temperatures to suppress warping and layer separation

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament guide: material table (Bambu Lab Wiki)

    Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X1 Carbon (X1C) print nylon (PA)?

Fits

Bambu recommends an enclosed printer for PA and names the X1C as one.

3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    ABS, ASA, PC, PA, and their CF/GF reinforced materials

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Require higher heatbed and chamber temperatures to suppress warping and layer separation

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament guide: material table (Bambu Lab Wiki)

    Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X1 Carbon (X1C) print polycarbonate (PC)?

Fits

Bambu recommends an enclosed printer for PC and names the X1C as one.

3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    ABS, ASA, PC, PA, and their CF/GF reinforced materials

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Require higher heatbed and chamber temperatures to suppress warping and layer separation

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament guide: material table (Bambu Lab Wiki)

    Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X1 Carbon (X1C) print carbon and glass-fibre filled filament?

Fits, with limits

The X1C ships with a hardened steel nozzle. Bambu says carbon and glass-fibre filament needs a hardened steel nozzle.

Limit

  1. Bambu does not publish whether the X1C extruder gear is hardened.
3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Nozzles (Bambu Lab Wiki)

    P1S comes standard with a 0.4mm stainless steel nozzle, X1C comes standard with a 0.4mm hardened steel nozzle

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    When printing carbon fiber or glass fiber-reinforced materials

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament guide: material table (Bambu Lab Wiki)

    Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly

    Bambu Lab · checked 18 November 2026

Ask us to add something

Ask for it and we'll look for the maker's own information. If an answer looks wrong, report a mistake instead.

REQUESTNO ACCOUNT NEEDED

What should we add for this printer?

Fill in any box. We store what you type, the page you sent it from and the time. Please don't include personal details.