ReplacementHQAccessibility

Home3D printingBambu LabA1

Bambu Lab A1

The materials it can print and the parts that wear out. 14 answers, all from Bambu Lab's own information.

Type
Open frame
Status
Current
Answers
14
Checked
18 November 2026

Find your part

Find the exact replacement for your A1

Or start from a kind of part

Find your part

  1. Printer
  2. Part
  3. Version
  4. Get it

The page stays where you left it. Esc or Back closes the finder.The page stays where you left it. Close or go back to return to it.

What the Bambu Lab A1 takes, part by part

Generic drawing · not to scale
MATERIAL · TPUCHECKED 18 NOVEMBER 2026

Can the Bambu Lab A1 print TPU?

Fits, with limits

The maker lists TPU as ideal for the A1, with limits in Bambu's TPU guide: the AMS lite cannot feed ordinary TPU, the A1 series cannot print TPU 85A or the softer TPU 75A, and the Cool Plate SuperTack is not for TPU.

Limits

  1. Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception.
  2. TPU 75A and TPU 85A: Bambu marks them not compatible with the A1 series. Its table marks TPU 90A, TPU 95A HF and TPU for AMS as compatible.
  3. Bambu says not to use the Cool Plate SuperTack to print TPU.

Applies to

SOURCES 5 quotes from the maker, checked 18 November 2026
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 TPU printing guide (Bambu Lab Wiki)

    AMS 2 Pro AMS lite AMS ... TPU 85A ❌ ✅ ✅ ❌ ⚠️ ❌ ❌ ❌

    How to read this: Bambu's AMS table: the AMS 2 Pro, AMS lite and AMS are its last three columns, and the last three marks on the TPU 85A row are ❌ (not usable). On the source page the TPU 75A, 90A and 95A HF rows end with the same three ❌ marks.

    Bambu Lab · checked 18 November 2026

  3. SRC 03 TPU printing guide (Bambu Lab Wiki)

    TPU 75A( 2.85 mm) TPU 85A TPU 90A TPU 95A HF TPU for AMS ... A1 Series ❌ ❌ ✅ ✅ ✅

    How to read this: Bambu's printer table: each mark is one TPU grade in the order of the headings. For the A1 series, TPU 75A and TPU 85A are marked ❌ (not compatible) and the other three ✅.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 TPU printing guide (Bambu Lab Wiki)

    TPU for AMS: Can be printed using the regular automatic feeding function of all AMS series products.

    Bambu Lab · checked 18 November 2026

  5. SRC 05 TPU printing guide (Bambu Lab Wiki)

    Do not use the Cool Plate SuperTack to print TPU.

    Bambu Lab · checked 18 November 2026

Every answer for the A1

We have 14 answers for the Bambu Lab A1: 8 on materials and 6 on parts that wear out. Each one quotes Bambu Lab's own information. We last checked them on 18 November 2026. We haven't physically tested this printer. How we check answers.

Parts that wear out

Nozzle system on the Bambu Lab A1

Maker fact

On the A series (A2L, A1, A1 mini) the nozzle detaches from the heating assembly, so the nozzle can be replaced on its own.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Nozzles (Bambu Lab Wiki)

    The A series nozzle is easily detached from the heating assembly ... Compatibility: A2L/ A1 / A1 mini

    Bambu Lab · checked 18 November 2026

Stock nozzle on the Bambu Lab A1

Maker fact

The A1 ships with a 0.4 mm stainless steel nozzle.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Hot End All-Metal Nozzle Stainless Steel Max Hot End Temperature 300 °C Nozzle Diameter 0.4 mm (Included)

    Bambu Lab · checked 18 November 2026

Hardened-nozzle guidance on the Bambu Lab A1

Maker fact

Bambu says filament with hard particles such as carbon or glass fibre needs a hardened steel nozzle in place of the stock stainless one.

2 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    When printing filaments containing hard particles (CF, GF, etc.) ... it is necessary to replace the nozzle with hardened steel to prevent excessive wear

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Nozzles (Bambu Lab Wiki)

    A series printer comes standard with a 0.4mm stainless steel nozzle, and a hardened steel nozzle can be upgraded to an optional upgrade.

    Bambu Lab · checked 18 November 2026

Stock build plate on the Bambu Lab A1

Maker fact

The A1 comes with a textured PEI plate.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Introduction to the A1 (Bambu Lab Wiki)

    The A1 comes with a textured PEI plate (included in the unboxing package)

    Bambu Lab · checked 18 November 2026

PTFE tube on the Bambu Lab A1

Maker fact

PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.

3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 PTFE tube (Bambu Lab Wiki)

    routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead

    Bambu Lab · checked 18 November 2026

  2. SRC 02 PTFE tube (Bambu Lab Wiki)

    Under normal usage, we recommend replacing the tube every two months

    Bambu Lab · checked 18 November 2026

  3. SRC 03 PTFE tube (Bambu Lab Wiki)

    When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month

    Bambu Lab · checked 18 November 2026

Belts on the Bambu Lab A1

Maker fact

The A1 has 3 adjustable belt tensioners. It checks belt tension when it prepares to print and prompts you to re-tension a belt when needed; you do the tensioning.

2 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Introduction to the A1 (Bambu Lab Wiki)

    The A1 is equipped with 3 adjustable belt tensioners.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 A1 belt tension (Bambu Lab Wiki)

    If re-tensioning is confirmed to be necessary, the printer will display a relevant prompt. Please follow the prompt to tension the corresponding belt

    Bambu Lab · checked 18 November 2026

Which materials can the A1 print?

Can the Bambu Lab A1 print PLA?

Fits

The maker lists PLA as ideal for the A1.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab A1 print PETG?

Fits, with limits

The maker lists PETG as ideal for the A1.

Limit

  1. The A1 is open-frame; the maker recommends an enclosed printer for PETG.
2 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Note : For PETG and PETG-CF/GF, an enclosed printer is recommended to prevent low ambient temperatures from reducing the model's interlayer strength.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab A1 print TPU?

Fits, with limits

The maker lists TPU as ideal for the A1, with limits in Bambu's TPU guide: the AMS lite cannot feed ordinary TPU, the A1 series cannot print TPU 85A or the softer TPU 75A, and the Cool Plate SuperTack is not for TPU.

Limits

  1. Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception.
  2. TPU 75A and TPU 85A: Bambu marks them not compatible with the A1 series. Its table marks TPU 90A, TPU 95A HF and TPU for AMS as compatible.
  3. Bambu says not to use the Cool Plate SuperTack to print TPU.
5 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 TPU printing guide (Bambu Lab Wiki)

    AMS 2 Pro AMS lite AMS ... TPU 85A ❌ ✅ ✅ ❌ ⚠️ ❌ ❌ ❌

    How to read this: Bambu's AMS table: the AMS 2 Pro, AMS lite and AMS are its last three columns, and the last three marks on the TPU 85A row are ❌ (not usable). On the source page the TPU 75A, 90A and 95A HF rows end with the same three ❌ marks.

    Bambu Lab · checked 18 November 2026

  3. SRC 03 TPU printing guide (Bambu Lab Wiki)

    TPU 75A( 2.85 mm) TPU 85A TPU 90A TPU 95A HF TPU for AMS ... A1 Series ❌ ❌ ✅ ✅ ✅

    How to read this: Bambu's printer table: each mark is one TPU grade in the order of the headings. For the A1 series, TPU 75A and TPU 85A are marked ❌ (not compatible) and the other three ✅.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 TPU printing guide (Bambu Lab Wiki)

    TPU for AMS: Can be printed using the regular automatic feeding function of all AMS series products.

    Bambu Lab · checked 18 November 2026

  5. SRC 05 TPU printing guide (Bambu Lab Wiki)

    Do not use the Cool Plate SuperTack to print TPU.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab A1 print PVA support material?

Fits

The maker lists PVA as ideal for the A1.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab A1 print ABS and ASA?

Not recommended

The maker lists ABS and ASA as not recommended for the A1.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab A1 print polycarbonate (PC)?

Not recommended

The maker lists PC as not recommended for the A1.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab A1 print nylon (PA)?

Not recommended

The maker lists PA as not recommended for the A1.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab A1 print carbon and glass-fibre filled filament?

Conflicting information

Bambu's own pages disagree. The A1 product page lists carbon and glass-fibre filled filament as not recommended. Bambu's filament guide lists PLA-CF and PLA-GF as compatible with open-frame A Series printers such as the A1. We can't tell you which applies, so we give no verdict.

What Bambu says either way

  1. Whichever page you follow, Bambu says these filaments need a hardened steel nozzle. The A1 ships with a stainless steel nozzle, which Bambu says wears out quickly with them.
  2. Fitting a hardened nozzle meets that one requirement. It doesn't settle the disagreement between Bambu's two pages.
  3. For nylon (PA), PET and PPA filled with carbon or glass fibre, the A1 page warns of weaker layers and more warping on large prints, and says they suit small prints with low infill.
9 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Bambu Lab A1 (UK store)

    Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended

    How to read this: On Bambu's spec table each list comes before its label: PLA, PETG, TPU and PVA are marked Ideal; ABS, ASA, PC, PA, PET and carbon or glass-fibre filled filament are marked Not Recommended.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Open-frame printer (A Series, P1P, etc. ) ... PLA-CF/GF Compatible Compatible

    How to read this: In the guide's printer table the first 'Compatible' is the open-frame column (A Series) and the second is the enclosed column.

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament guide: material table (Bambu Lab Wiki)

    their CF/GF reinforced materials ... Not prone to warping; no mandatory temperature requirements Open-frame or enclosed printer

    Bambu Lab · checked 18 November 2026

  4. SRC 04 Bambu Lab A1 (UK store)

    When printing filaments containing hard particles (CF, GF, etc.) ... it is necessary to replace the nozzle with hardened steel to prevent excessive wear

    Bambu Lab · checked 18 November 2026

  5. SRC 05 Filament guide: material table (Bambu Lab Wiki)

    When printing carbon fiber or glass fiber-reinforced materials

    Bambu Lab · checked 18 November 2026

  6. SRC 06 Filament guide: material table (Bambu Lab Wiki)

    Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly

    Bambu Lab · checked 18 November 2026

  7. SRC 07 Bambu Lab A1 (UK store)

    risk of reduced interlayer strength and increased warping for large-sized models

    Bambu Lab · checked 18 November 2026

  8. SRC 08 Bambu Lab A1 (UK store)

    PA-CF/GF, PET-CF/GF, PPA-CF/GF

    Bambu Lab · checked 18 November 2026

  9. SRC 09 Bambu Lab A1 (UK store)

    can be used on the A1 to print small-sized models with low filling density

    Bambu Lab · checked 18 November 2026

Replacement parts for the Bambu Lab A1

Each part has its own page with Bambu Lab's words, the versions it comes in and the date we checked.

Ask us to add something

Ask for it and we'll look for the maker's own information. If an answer looks wrong, report a mistake instead.

REQUESTNO ACCOUNT NEEDED

What should we add for this printer?

Fill in any box. We store what you type, the page you sent it from and the time. Please don't include personal details.