ReplacementHQAccessibility

Home3D printingBambu LabX2D

Bambu Lab X2D

The materials it can print and the parts that wear out. 12 answers, all from Bambu Lab's own information.

Type
Enclosed
Status
Current
Answers
12
Checked
18 November 2026

Part-by-part answers for the X2D aren't ready yet. The answers below cover the materials it can print and the parts that wear out, from Bambu Lab's own information.

What the Bambu Lab X2D takes, part by part

Generic drawing · not to scale
MATERIAL · TPUCHECKED 18 NOVEMBER 2026

Can the Bambu Lab X2D print TPU?

Fits, with limits

Bambu marks TPU 95A HF and TPU for AMS available on the X2D's main hotend with the 0.4 mm nozzle. TPU 85A needs the 0.6 or 0.8 mm nozzle, and the auxiliary hotend can't print ordinary TPU.

Limits

  1. Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception.
  2. Bambu marks TPU 85A unavailable on the main hotend with the 0.4 mm standard nozzle; it lists the 0.6 and 0.8 mm nozzles as available.
  3. Bambu marks ordinary TPU unavailable on the auxiliary hotend.
  4. Bambu says not to use the Cool Plate SuperTack to print TPU.

Applies to

SOURCES 7 quotes from the maker, checked 18 November 2026
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows:

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    TPU 95A HF ❌ ✅ ✅ ✅ ✅ ✅ ✅

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    TPU 85A ❌ ❌ ✅ ✅ ❌ ⚠️ ⚠️

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility of the auxiliary hotend is divided into the following four levels: ... TPU 95A HF ❌ ❌ ❌ ❌ ❌ ❌ ❌

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  5. SRC 05 TPU printing guide (Bambu Lab Wiki)

    AMS 2 Pro AMS lite AMS ... TPU 85A ❌ ✅ ✅ ❌ ⚠️ ❌ ❌ ❌

    How to read this: Bambu's AMS table: the AMS 2 Pro, AMS lite and AMS are its last three columns, and the last three marks on the TPU 85A row are ❌ (not usable). On the source page the TPU 75A, 90A and 95A HF rows end with the same three ❌ marks.

    Bambu Lab · checked 18 November 2026

  6. SRC 06 TPU printing guide (Bambu Lab Wiki)

    TPU for AMS: Can be printed using the regular automatic feeding function of all AMS series products.

    Bambu Lab · checked 18 November 2026

  7. SRC 07 TPU printing guide (Bambu Lab Wiki)

    Do not use the Cool Plate SuperTack to print TPU.

    Bambu Lab · checked 18 November 2026

Every answer for the X2D

We have 12 answers for the Bambu Lab X2D: 7 on materials and 5 on parts that wear out. Each one quotes Bambu Lab's own information. We last checked them on 18 November 2026. We haven't physically tested this printer. How we check answers.

Parts that wear out

Nozzle system on the Bambu Lab X2D

Maker fact

The X2D takes the Bambu Hotend for the H2 series and P2S, which has a quick-swap design.

2 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Nozzles (Bambu Lab Wiki)

    Bambu Hotend - H2/P2S Standard & High Flow Compatibility: H2D (both left and right), H2S, H2C (left hotend), P2S, X2D

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Nozzles (Bambu Lab Wiki)

    This hotend features a quick swap design, which enables easy separation of the thermal and electronic components of the hotend.

    Bambu Lab · checked 18 November 2026

Hardened-nozzle guidance on the Bambu Lab X2D

Maker fact

For carbon and glass-fibre filament Bambu says not to use stainless steel or brass nozzles. The spare hotend in the X2D's box is a 0.4 mm hardened steel hotend.

3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament guide: material table (Bambu Lab Wiki)

    When printing carbon fiber or glass fiber-reinforced materials

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly

    Bambu Lab · checked 18 November 2026

  3. SRC 03 X2D packaging list (Bambu Lab Wiki)

    0.4 mm hardened steel Hotend & Hotend Silicone Sock For replacement when the hotend or silicone sock is damaged.

    Bambu Lab · checked 18 November 2026

Stock build plate on the Bambu Lab X2D

Maker fact

The X2D comes with a Bambu Textured PEI Plate. It takes all current Bambu 256 by 256 mm plates but can't recognise first-generation plates.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Introduction to the X2D (Bambu Lab Wiki)

    X2D printers come with a Bambu Textured PEI Plate and support all current Bambu 256*256mm build plates, but cannot recognize first-generation plates.

    Bambu Lab · checked 18 November 2026

PTFE tube on the Bambu Lab X2D

Maker fact

For the X2D the maker lists an AMS to filament buffer tube of 525 mm, 2.5 mm inner and 4.0 mm outer diameter. PTFE tube carries the filament from the AMS or the external spool holder to the extruder, which is inside the toolhead. Bambu recommends replacing the tube every two months under normal use, and inspecting it every month with highly abrasive filaments such as carbon fibre or glow-in-the-dark.

4 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 PTFE tube (Bambu Lab Wiki)

    X2D Tube Location Qty Length ID / OD AMS → Filament Buffer 1 525 mm 2.5 / 4.0 mm

    Bambu Lab · checked 18 November 2026

  2. SRC 02 PTFE tube (Bambu Lab Wiki)

    routing it from the Automatic Material System (i.e. AMS) or the external spool holder to the extruder inside the printer toolhead

    Bambu Lab · checked 18 November 2026

  3. SRC 03 PTFE tube (Bambu Lab Wiki)

    Under normal usage, we recommend replacing the tube every two months

    Bambu Lab · checked 18 November 2026

  4. SRC 04 PTFE tube (Bambu Lab Wiki)

    When printing with highly abrasive filaments (such as carbon fiber or glow-in-the-dark filaments), we recommend inspecting the tube every month

    Bambu Lab · checked 18 November 2026

Belts on the Bambu Lab X2D

Maker fact

The X2D has a semi-automatic, spring-set belt tensioner at the upper rear. To tension the belts, loosen the four tensioner screws on the back, move the toolhead, then retighten them.

2 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Introduction to the X2D (Bambu Lab Wiki)

    The upper rear part of the X2D is equipped with a semi-automatic belt tensioning mechanism.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 X2D belt tensioning (Bambu Lab Wiki)

    Use an H2.0 screwdriver to loosen the four tensioner screws on the back of the printer

    Bambu Lab · checked 18 November 2026

Which materials can the X2D print?

Can the Bambu Lab X2D print PLA?

Fits

Bambu marks PLA Basic available on the X2D's main hotend with every nozzle size.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows: ... PLA Basic ✅ ✅ ✅ ✅ ✅ ✅ ✅

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X2D print PETG?

Fits, with limits

Bambu marks PETG Basic available on the X2D's main hotend with every nozzle size. It says the auxiliary hotend can print PETG but isn't a recommended choice.

Limit

  1. Use the main hotend: Bambu says PETG on the auxiliary hotend is not a primary recommended option.
3 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows: ... PETG Basic ✅ ✅ ✅ ✅ ✅ ✅ ✅

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    Please note that while some filaments (e.g., PETG) can be printed using the auxiliary hotend, they are not the primary recommended options

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament guide: material table (Bambu Lab Wiki)

    Note : For PETG and PETG-CF/GF, an enclosed printer is recommended to prevent low ambient temperatures from reducing the model's interlayer strength.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X2D print TPU?

Fits, with limits

Bambu marks TPU 95A HF and TPU for AMS available on the X2D's main hotend with the 0.4 mm nozzle. TPU 85A needs the 0.6 or 0.8 mm nozzle, and the auxiliary hotend can't print ordinary TPU.

Limits

  1. Ordinary TPU cannot be fed through the AMS, AMS lite or AMS 2 Pro. Bambu's own 'TPU for AMS' filament is the exception.
  2. Bambu marks TPU 85A unavailable on the main hotend with the 0.4 mm standard nozzle; it lists the 0.6 and 0.8 mm nozzles as available.
  3. Bambu marks ordinary TPU unavailable on the auxiliary hotend.
  4. Bambu says not to use the Cool Plate SuperTack to print TPU.
7 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows:

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    TPU 95A HF ❌ ✅ ✅ ✅ ✅ ✅ ✅

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    TPU 85A ❌ ❌ ✅ ✅ ❌ ⚠️ ⚠️

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility of the auxiliary hotend is divided into the following four levels: ... TPU 95A HF ❌ ❌ ❌ ❌ ❌ ❌ ❌

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  5. SRC 05 TPU printing guide (Bambu Lab Wiki)

    AMS 2 Pro AMS lite AMS ... TPU 85A ❌ ✅ ✅ ❌ ⚠️ ❌ ❌ ❌

    How to read this: Bambu's AMS table: the AMS 2 Pro, AMS lite and AMS are its last three columns, and the last three marks on the TPU 85A row are ❌ (not usable). On the source page the TPU 75A, 90A and 95A HF rows end with the same three ❌ marks.

    Bambu Lab · checked 18 November 2026

  6. SRC 06 TPU printing guide (Bambu Lab Wiki)

    TPU for AMS: Can be printed using the regular automatic feeding function of all AMS series products.

    Bambu Lab · checked 18 November 2026

  7. SRC 07 TPU printing guide (Bambu Lab Wiki)

    Do not use the Cool Plate SuperTack to print TPU.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X2D print PVA support material?

Fits

Bambu marks PVA available on the X2D's main hotend with the 0.4 mm and larger nozzles.

1 quote from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows: ... PVA ❌ ✅ ✅ ✅ ✅ ✅ ✅

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X2D print ABS and ASA?

Fits, with limits

Bambu marks ABS and ASA available on the X2D's main hotend and recommends an enclosed printer for them; the X2D is enclosed. Its filament guide says the auxiliary hotend is not recommended for ABS.

Limit

  1. Use the main hotend: Bambu marks ABS and ASA not recommended on the auxiliary hotend.
7 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows:

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    ABS ✅ ✅ ✅ ✅ ✅ ✅ ✅

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    ASA ✅ ✅ ✅ ✅ ✅ ✅ ✅

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 Filament guide: material table (Bambu Lab Wiki)

    ABS, ASA, PC, PA, and their CF/GF reinforced materials

    Bambu Lab · checked 18 November 2026

  5. SRC 05 Filament guide: material table (Bambu Lab Wiki)

    Require higher heatbed and chamber temperatures to suppress warping and layer separation

    Bambu Lab · checked 18 November 2026

  6. SRC 06 Filament guide: material table (Bambu Lab Wiki)

    Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

  7. SRC 07 Filament guide: material table (Bambu Lab Wiki)

    ABS Compatible (For X2D printer: Main hotend Compatible, auxiliary hotend not recommended)

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X2D print polycarbonate (PC)?

Fits

Bambu marks PC available on the X2D's main hotend with the 0.4 mm and larger nozzles, and recommends an enclosed printer for it; the X2D is enclosed.

4 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows: ... PC PC ❌ ✅ ✅ ✅ ✅ ✅ ✅

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament guide: material table (Bambu Lab Wiki)

    ABS, ASA, PC, PA, and their CF/GF reinforced materials

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament guide: material table (Bambu Lab Wiki)

    Require higher heatbed and chamber temperatures to suppress warping and layer separation

    Bambu Lab · checked 18 November 2026

  4. SRC 04 Filament guide: material table (Bambu Lab Wiki)

    Enclosed printer ( Bambu H2 Series, X2D, P2S, X1, X1C, P1S, etc. )

    Bambu Lab · checked 18 November 2026

Can the Bambu Lab X2D print carbon and glass-fibre filled filament?

Fits, with limits

Bambu marks PLA-CF, PETG-CF and the nylon carbon and glass-fibre filaments available on the X2D's main hotend with the 0.4 mm nozzle; the X2D uses hardened steel extruder gears. Some are highly not recommended on the auxiliary hotend, and PPS-CF can't be printed.

Limits

  1. Use the main hotend: Bambu marks PETG-CF, ASA-CF and PA6-CF highly not recommended on the auxiliary hotend.
  2. Bambu marks PPS-CF unavailable on the X2D.
  3. Bambu marks fibre-filled filament unavailable with the 0.2 mm nozzle.
  4. Bambu marks fibre-filled filament not recommended on the main hotend with the 0.4 mm high-flow nozzle.
8 quotes from Bambu Lab, checked 18 November 2026. See the maker's words
  1. SRC 01 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility table for the main hotend is as follows:

    Bambu Lab · checked 18 November 2026

  2. SRC 02 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    PLA-CF ❌ ✅ ✅ ✅ ⚠️ ✅ ✅

    Bambu Lab · checked 18 November 2026

  3. SRC 03 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    PAHT-CF ❌ ✅ ✅ ✅ ⚠️ ✅ ✅

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  4. SRC 04 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    PPS-CF ❌ ❌ ❌ ❌ ❌ ❌ ❌

    Bambu Lab · checked 18 November 2026

  5. SRC 05 Filament compatibility guide for the X2D (Bambu Lab Wiki)

    The filament compatibility of the auxiliary hotend is divided into the following four levels: ... PETG-CF ❌ ⛔ ⛔ ⛔ ⛔ ⛔ ⛔

    How to read this: Bambu's X2D tables: the seven marks are the 0.2, 0.4, 0.6 and 0.8 mm standard nozzles, then the 0.4, 0.6 and 0.8 mm high-flow nozzles. ✅ Available, ⚠️ Not recommended, ⛔ Highly not recommended, ❌ Unavailable.

    Bambu Lab · checked 18 November 2026

  6. SRC 06 Introduction to the X2D (Bambu Lab Wiki)

    The X2D uses hardened steel extruder gears

    Bambu Lab · checked 18 November 2026

  7. SRC 07 Filament guide: material table (Bambu Lab Wiki)

    When printing carbon fiber or glass fiber-reinforced materials

    Bambu Lab · checked 18 November 2026

  8. SRC 08 Filament guide: material table (Bambu Lab Wiki)

    Do not use a stainless steel or brass nozzle. Their hardness is insufficient, so they wear out quickly

    Bambu Lab · checked 18 November 2026

Ask us to add something

Ask for it and we'll look for the maker's own information. If an answer looks wrong, report a mistake instead.

REQUESTNO ACCOUNT NEEDED

What should we add for this printer?

Fill in any box. We store what you type, the page you sent it from and the time. Please don't include personal details.